Digibell Vandal Resistant System Guía de instalación descargar pdf (Pagina 26)

Digibell Vandal Resistant System

PD-169 Issue 3B Installation Guide Page 26 of 56

TONE – Re-assurance Tone

To conform to DDA requirements the controller provides a re-assurance tone when a phone

is ringing and also when the door lock has been operated from the door panel or the called

phone, but not the exit button. In some situations these tones can be considered a nuisance

and therefore can be turned off.

Four settings are available: -

[Both] = Ringing and lock tones.

[Call] = Ringing tone only.

[Lock] = Lock tone only.

[None] = No tones.

CANC – Not used, leave on the Default of [Yes]

BCAL – Not used, leave on the Default of [No]

12A? – Flat 13 Numbered as 12A

For use when flat numbering is … 11, 12, 12A, 14, 15 … When set to [Yes] entering “12A

call” will actually send “13” so that the DBA-4I/8Z’s can be set to respond to … 11, 12, 13,

14, 15 …

BSD-DIG Door Controller Jumper Settings

All the jumpers apply to video systems only, so settings have no effect.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Sin comentarios

Digibell Vandal Resistant System Guía de instalación Pagina 26